LithoPore® - LPAC Pre Cast Sandwich Facade Element can be manufactured as a three layer system. The outer layer can be a brick veneer that will be embedded into a thin layer (10-30 mm) of LPAC800-1400, so a product with higher density. In this case the brick veneers are fixed completely.
The third layer (internal) will be an insulating material such as LPAC150-300, with a dry density of 150-300 kg/m³ to achieve an optimum insulation effect of the building element. The insulation layer can be varied in thickness depending on the requirement for insulation (50-150 mm).