Logo Facebook   Logo Youtube   Logo LinkedIn   Link Imprint Page
A brand of Luca Industries International GmbH

LithoPore® - LPAC Cast at Site using LGS Frame

LithoPore® - LPAC Cast at Site using LGS
  • Fireproofed (totally inorganic)
  • Fully recyclable (ordinary construction waste)
  • Sustainable
  • Consistent
  • Stable

LithoPore® - LPAC Cast at Site Wall using LGS Frame can be applied to cast monolithic walls at site. First the whole Light-Gauge Steel (LGS) frame structure has to be installed. Than cement fibre boards or MGO boards are applied on the outside of the steel structure. LPAC will be manufactured and pumped into the wall system afterwards.

The use of LPAC technology in opposite to other competitor products is leading to an excellent stability and therefore a completely consistent result. There is no variation in density if different parts of the wall are controlled by density.

With LithoPore® - LPAC Cast at Site Wall using LGS walls up to 3 meters in height can be poured. The density can be varying between 200 kg/m² for non-load bearing walls up to 800 kg/m³ for load bearing walls. So the applicator can decide whether to have a heavier product with high compressive strength and lower insulation effect or the reverse, an insulating product with sufficient compressive strength.
  metric imperial
entity value entity value
Density [kg/m³] 200-800 [pcf] 12.5-49.9
Thermal [W/mK] 0.06 - 0.23 [R-value per in] 0.6-2.4
Compression [MPa] 0.25-6.0 [PSI] 37-882
×
< >